Welcome

Where to tie in:

http://www.benzworld.org/forums/unimog/1545179-352-block-hose-heaters.html

One possible mounting location:

http://www.benzworld.org/forums/4521417-post41.html

Another good read/install, Espar D5 in enclosed case under step:
http://www.benzworld.org/forums/unimog/1562059-espar-d5s-ebay-5.html

 

http://www.benzworld.org/forums/unimog/1562059-espar-d5s-ebay.html

 

I'm just about finished with the installation of my 90ST in my camper. I put it under the air cleaner, built a bracket off the outrigger.

Here is my camper hydronic system diagram.

The 90ST is behind the intercooler radiator, you can just see it in this photo.

Still have to plumb the exhaust in, but was thinking of drilling a hole in the bashplate and directing it towards the sump - might as well use the waste heat to warm the oil.

 

Thank u all for the prompt reply. Your comments were very helpfull. Sunder

 

I have successfully installed the webasto heater on my mog and its working perfectly. thank u all for advising
sunder

 

Hi Sunder, any photos of where you put it?

 

http://daten.standheizung-shop.de/EBA/EBA-Thermo90S-1301494C.pdf

 

Hello Iain. Unfortunately I didn't take any pictures. But I'll get to my truck and take pics. Will attach them soon.
Sunder

 

Ive taken couple of pictures of the heater location. but I can't attach those pics to my message. how do u do that. it's asking for the URL of the picture

 

can't I simply attach as we normally do in the mails

 

How to post pictures

 

Posting images (test)

thank u Trev I'll follow your instructions

 

heater installation

here is how I mounted the webasto Thermo ST90 heater

 

My Mog pics

I have finally finished remodelling my mog. Here I've tried to attach a couple of pics

 

My Mog pics

I have finally finished remodelling my mog. Here I've tried to attach a couple of pics.
Shit I can't attach the pictures. I have pushed the Manage attachments button below and uploaded as it says but it doesn't work. pls help

 

I have finally finished remodelling my mog. Here I've tried to attach a couple of pics.
Shit I can't attach the pictures. I have pushed the Manage attachments button below and uploaded as it says but it doesn't work. pls help

Congratulations on the upgrades getting done. As for pics.... maybe they are too big of files. What format are they in? JPG, PNG? What error message does it give you? Either at the top of the box or the bottom; I forget which, it will give you a message of why it won't load

 

Many thanks for your reply. The pics are in JPEG format. There is no any error message.

 

Here I have managed to attach a few photos

 

More Mog pics

Interior

 

Wow, that's really nice both inside and out.

Just the way the picture was taken, that overhang on the rear looks huge!!

Did you build up the interior? It appears to be well done.

 

Very nice, great work on the rear extension. What head height clearance do you have inside. did you extend the roof?

 

Reply

yes I did the rebuilding all on my own. inside and out. I didn't extend the roof as I didn't have an appropriate garage and tools for that. But nonetheless I'm quite satisfied with what I have done. I have installed Truma Combi heater inside, it works just great. Fixed an external shower. Nice blaupunkt audio system with an amplifier, TV, 150L water tank. No problem to travel where ever I want to

 

GREAT conversion man. Looks awesome. Does the rear bench seating convert to a bed? How do you find moving around with the limited interior height? Again, well done

 

Thank u for your opinion. the rear bench converts to a bed. wide enough for 3 people. The interior height is limited but I only enter there to rest or have a meal as I drive almost all the time