The tightening torque must be 110 lb-ft (150 Nm).

 

Thanks , I will use torque of 150
Saludos

 

You may have problems getting the wheel off if you have a flat tire and have to change it on the side of the road.
150 is waaaay to tight.
Just my 2 cents worth.

 

150 Nm is about 110 lb-ft. Not at all too tight. Do it less, and you stand a good chance of having them come loose and losing the wheel on the road.

 

torque of whees screw

I think after using the torque at 150 is ok the feeling by hand seems ok .
Thanks
saludos
PT