Mercedes-Benz Forum banner

Replacing Turn Signal assembly

5.5K views 6 replies 4 participants last post by  bradsscooters  
#1 ·
My wife backs into the garage and I notice the front left turn signal lens is gone from my 97 S320.
I see the part is reasonably inexpensive but I have no clue how to install it. In the old days there were a couple of screws to remove..

Does anyone know of a tutorial on how to remove the old and replace with a new?

Thanks for the help
 
#2 ·
There is a plastic, for lack of a better term, lever that sits just to the side of the headlight assembly. You push that toward the fender, gently, and it releases the side marker. Then you pull it out toward the front of the car and away from the fender. I just had to do this when I was inspecting my coil packs on my 93 400 SEL. To replace, make sure that the two guides that slide into the side of the headlight bezel are aligned to the slots on the headlight bezel and push in gently, as the electrical plug of the side marker has to get by the metal frame that the side marker set in before it will lock in place. Hope this helps.
 
#5 ·