Mercedes-Benz Forum banner

Adblue issue

32K views 10 replies 9 participants last post by  pam walia  
#1 ·
I have a 2016 w213 e220d
Car displays cannot read fluid level on adblue, also have the engine management light on, it does show level briefly sometimes but then goes off, I have 2 fault codes, U05A308, U05A387, fault pointed towards nox sensor, I replaced the nox sensor but made no difference, any idea or tips would be great
 
#2 ·
I have a 2016 w213 e220d
Car displays cannot read fluid level on adblue, also have the engine management light on, it does show level briefly sometimes but then goes off, I have 2 fault codes, U05A308, U05A387, fault pointed towards nox sensor, I replaced the nox sensor but made no difference, any idea or tips would be great
 
#4 ·
I have a 2016 w213 e220d
Car displays cannot read fluid level on adblue, also have the engine management light on, it does show level briefly sometimes but then goes off, I have 2 fault codes, U05A308, U05A387, fault pointed towards nox sensor, I replaced the nox sensor but made no difference, any idea or tips would be great
I had this too, same model and year. It came up with the message engine will not start in xxx miles, then after a few days it would reset and it could read the adblue level, but then fault would return. Had it on and off for a few months. Took it to MB who updated software, fault returned after a week or so, took it back and they updated software again (said there had been a new adblue update), but it returned again. Then they replaced a sensor on the tank from a salvage one they had but only lasted a few days then fault returned. They said if that happened it’d be a whole new tank needed cos it comes with the sensor and pump in one unit costing about £1500. I got the serial number of the tank I needed and got a salvage one from eb*y. Indie fitted it in an hour and thats been ok for a year now. Good luck!