Mercedes-Benz Forum banner

1 - 1 of 1 Posts

·
Registered
Mercedes 300E 2.8 160K miles
Joined
·
15 Posts
Discussion Starter #1
I think when the previous owner did some work that the wiper was not aligned properly & returns to the wrong position 1/3 the way up on the windsheild instead of the normal rest position. When in use it makes a terrible knock on the glass on every cycle. I have reviewed several posts on the wiper system & they do show how to adjust the wiper, but they do not show how to align the "one armed bandit" to the beginning setting. Even after reviewing the wiper system info I still am having a problem even removing the cover. Does any one have any helpful tricks in removing the cover? Also after attempting to remove the cover the #2 fuse blows when I turn the switch on, so now the problem is worse. The motor turns on , but then the fuse blows. If any one has any solutions I would greatly appreciate some advise as RainX is not a very good stop gap remedy in driving Florida thunderstorms. Thanks very much, Tracy Cooley:confused:
 
1 - 1 of 1 Posts
Top