[Georgi Penchev]

Guys,

I had a different thread regarding the m104.991 swap that I plan to do. Since I'm buying an aftermarket ECU I started thinking about buying an aftermarket TCM and replace my old and harsh 722.5 with a 722.6.

The question is will it fit? I know it bolts to the engine right on, but will it fit into the transmission tunnel?

Can somebody share the length of the whole 722.6xx?

 

[bulspan]

It fits, you need a controller (~700€), 722.634 and shifter from a e270cdi w210, its direct bolt on afaik, thats what the guy from denmark who fabricates the controllers told me. i am planning same trans swap, as mu 722.5 is starting to fail.


Sent from my iPhone using Tapatalk

 

[bulspan]

How much it can cost this tranny in bulgaria? I couldn't find any on the web..


Sent from my iPhone using Tapatalk

 

[Georgi Penchev]

How much it can cost this tranny in bulgaria? I couldn't find any on the web..


Sent from my iPhone using Tapatalk

Go to the site http://megaparts.bg and use google translate on it. There are a lot of transmissions and other stuff there and the more they stay online the cheaper they get.
I am stalking one for roughly 200 euro.

I can help with the shipping if you decide to buy one.

is the 722.6 the same length as 722.5?

 

[bulspan]

Thanks, i will take a look i am too, but actualy i live in spain. If i do the swap i will bring the car to Plovdiv as i have trusted tranny mechanic to revise the future 722.6 before mounting.

I sent email to the guy asking about 722.5 compatibility. Will share the reply.

Here is what he said about e320 c124 with 722.369:

You only need to set up TPS 0 / 100% after instalation, thats it then you can drive, you can then finetune if you find some gearshift to hard. or soft

Gearbox
Gearbox from any inline 6 cylinder apart from 320CDI fits you engine. the strongest that fits you engine is from E270CDI

Gear Lever
You need the gearlewer from a C class W202 or SL class R129 then it fits the W124 (It has to be the PRNalso D432(1) the number 1 is importand )
http://ofgear.dk/userguide/gearlever.html

And i supply all plug on the wiring harness, only plug for reverse light you need to do youselve

TPS Sensor
Then you need a TPS sensor. from any W210 car

Speed Signal optionel
And speed signal is absolutly to prefer. best from front wheel ABS sensor will work
http://ofgear.dk/userguide/rpmkmin.html

Suggestion
Suggested controller is
https://ofgear.dk/Shop.ehtml/products/7226-gearbox-controller-oled-display-m.html


Sent from my iPhone using Tapatalk

 

[Georgi Penchev]

Alright,

722.3 is shorter than the .5xx cause it lacks the 4<>5 overdrive. If I understand correctly both .3xx and .6xx share the same length ... In that case we are gonna need longer driveshafts?

I want to be 100 percent sure what do I need to supply before starting this conversion.