Mercedes-Benz Forum banner

W204 c63 AMG Full Break Job Part Help

3614 Views 13 Replies 8 Participants Last post by  doug_engel
Hello everyone!
This is my first post on the forum but a long time viewer and I need some help and who better to ask then all the lads part of Benz World.

I drive a c63 AMG and my car was shaking when braking so a mechanic told me it was my rotors after inspecting the car. Attached is the quote he gave me...MADNESS! But what can do you.

After searching the forums I’ve seen the website Mercedes-Benz OEM Parts | Get Mercedes Parts.
Basically I wish to get all the required parts off the invoice off this website instead but there’s so many brake options I’m not sure what to get!

If anyone can help me out that’d be awesome and if you got a question I’ll for sure get back.
Happy new year everyone
See less See more
1 - 2 of 14 Posts
Have a look at
Put in your car's details and it will display suitable parts ..
All you need is rotors and pads to suit your car.
You can re-use the wear sensors..
You may need some tools , torx bits ,,torque wrench and a brake piston spreader suitable for the six piston calipers.
Watch this ..
  • Like
Reactions: 1
Also , you don't need to use genuine MB can save some $ if you buy other brands. Up to you. MB don't make pads anyway,,they are made by others.
Pagid , Jurid , TRW are good and are oem.
When I did mine I bought Brembo rotors from FCPeuro ,,but I bought the pads here in Australia ,,,Bendix brand which are also good quality pads.
1 - 2 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.