Mercedes-Benz Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hello guys.

I recently replaced the stock brakes on my 90’ 2.6 to 98’ SL500 calipers and rotors.

While at it I also replaced the front control arms for proper Val joint to rotor spacing and well as both front and rear knuckles with spindles.

I’ve had the car for about 4 years now and I’ve never had any lights come on...after this brake overhaul the ABS light comes on every time after about 2-3 minutes of driving.

I did reuse the stock 190E ABS sensors, they fit perfectly into the r129 knuckles.

Did anyone ever encounter this issue while doing this brake swap?

Anything helps, this yellow glower is driving me nuts!
532BF33C-8478-438E-963B-665FDD7E91B0.jpeg
2D19CE62-D7AB-4FD6-B0F2-3317F0B8E702.jpeg
F65DF536-E672-4BAB-A555-AB13C9024FDF.jpeg
28EA6BF4-C057-4CC4-BFC3-C68E19DC15A5.jpeg
485CCE2A-1988-422C-985F-F7A2AA71271E.jpeg
 
1 - 1 of 1 Posts
Top