Complete project car running with bad transmission but have extra good transmission car is black needs paint I believe it has original paint with no accidents palomino interior needs work good project for someone that could do there own work that wants a 500 SEC the car is in apple valley at a friends home the only thing I want off the car is the wheels I will try and put a set of rollers on it the body is pretty straight will not need much body work I do not have pictures right now but I will next week and can text photos to whoever is interested I will not be putting photos on the website not sure how to asking $ 1000.00 obo any questions let me know I have a car trailer and I may tow car to Orange County for gas money Thanks
I own a 1986 Mercedes 300sdl, guessing the mileage to be between 600,000 --700,00 miles ,(last two true odometer readings were 2009 & 2011,(412603 miles then) it's my daily driver.my tranny's not feeling right.I paid $150.00 for the car 2-1/2 years ago,but I've put over $6,500 into mostly mechanical part replacement and other than that have done my own regular maintenance.I hear many different opinions about how to remedy the slow initial forward surge after depressing the pedal, don't know if it's vacuum line replacement needed, adjustment of Bowden cable,or front seal replacement ( I believe it leaks into the engine block- often adding additional quart of fluid monthly) or if the tranny needs a rebuild.Any input would be welcome.
1990 Mercedes Benz 300 SE 140XXX Miles W126 Nachtgrün (Dark Green) exterior with Mushroom (beige) interior. 3.0 liter inline 6. Great gas mileage; average 22 mpg. 4-speed automatic S-Class W126...
raleigh.craigslist.org
You can contact me on this forum if you are interested.
1990 Mercedes Benz 300 SE 140XXX Miles W126 Nachtgrün (Dark Green) exterior with Mushroom (beige) interior. 3.0 liter inline 6. Great gas mileage; average 22 mpg. 4-speed automatic S-Class W126...
raleigh.craigslist.org
You can contact me on this forum if you are interested.
I've got a nicely refinished battery tray that I'm looking to sell. There was minor rust which I removed with a Dremel and then I laid down several coats of primer. Should be good to go for a while!
Asking $70 shipped anywhere in the US (just barely fits into a $15 medium flat rate box). Shoot me a DM if interested
AMG OZ Racing Mercedes Monoblocks 16X7.5 Set of 5 Made in Germany, Mercedes part #126 400 09 02.
Tires included. 4 of the tires are Michelin Pilot Sport All Season 225/50/16. They were driven a total of 4000 miles. The spare tire is a Goodyear Eagle GT 225/55/16 that is well worn but serviceable as a spare.
I do not want to separate tires from the wheels simply because it's a pain in the ass.
A quick refresher just in case –. Output for the 2V / SOHC 6.0 liter version was 360 HP. The car began life as a 1988 model year, 040 black on 271 black, US-spec 560 SEC. NOTE: When I bought the car the 4V heads were gone.
It's pretty close to it. The body is rusted through in so many places. The motor and trans gave up a few years ago, lost me job back then and couldn't afford to fix it and it sat in my parent's backyard for 4 years. I recently pulled the kit and bumpers to find holes all over. I'm selling what loose parts I have at the moment, haven't decided if I'm going to take it on to repair the whole car. I've got 2 kids now and a 4Runner and my Camaro I'm building. Might keep it for a long term project and slowly fix it.
My dash is cracked beyond belief. Turns out crack free blue dashes are practically non-existent these days. I pulled the trigger on a mint palomino dash with the intention of dying it. However, after talking to the shop handling my upholstery and exterior paint, I'm not sure that's the way...
If this is duplicated, please let me know. I searched for a similar (what did you do to your 123.....) thread here, but did not find one, so I will start off:
The dash in my 300SD was so bad (even the Coverlay dash cap was cracked!), I decided to replace it with one I got a while back. I am...
Hi there, I'm sure this has been asked at least a thousand times and then some more but I'd like to know if there are any wheel bolts that can replace the extended ones that are used on the 15 hole Gullideckel? I know the shorter ones would work but I'm trying to keep the look that the extended...
Hi all, my 560 has traveled 330k kms and has a smoking issue that points to the valve stem seals/guides. Only smoking at startup after long idles at the lights on hot days. I am planning to change the valve stem seals, chain, chain tensioner, guides and cam oilers. Because of the smoking issue...
Recently John posted a very good thread about the combination between the aftermarket mono valve MTC and MB. The thread can be found here: http://www.benzworld.org/forums/w126-s-se-sec-sel-sd/2497961-mono-valves-meaning-life.html . However, there is a bit more to the monovalve story going...
BenzWorld.org forum is one of the largest Mercedes-Benz owner websites offering the most comprehensive collection of Mercedes-Benz information anywhere in the world. The site includes MB Forums, News, Galleries, Publications, Classifieds, Events and much more!
crunk04gtp · updated 
ROLLGUY · updated 
Parvin84 · updated 
liviu165 · updated 
