Mercedes-Benz Forum banner
1 - 20 of 172 Posts

· Super Moderator
89 Mercedes 300E, 91 Mercedes 300CE, 71 BMW turbo 2002, 73 BMW 2002tii, 85 BMW 635csi
Joined
·
18,682 Posts
Discussion Starter · #1 ·
Benzworld is not liable for any bad dealings! If in doubt, don't!


Please keep thread clear of conversation to avoid clutter. PM member if you're interested in items,etc. Thank you :thumbsup:
 

· Registered
1985 300SD 1988 560SEC 822 1976 450SEL 1981 300SD
Joined
·
1,084 Posts
WTB '73 450SEL exhaust manifolds..

..or any that don't have the catalytic converters.

Tri-Ys wouldn't hurt either..
 

· Registered
'83 240d, '75 416 Unimog, '79 300SD
Joined
·
25 Posts
W116 Window Seals For All four windows Hard to find

I have a set of four Brand new mercedes OEM window seals for a w116, these are brand new perfect condition rubber, they are all the same part # and are the same for each window, this is the part that goes on the out side bottom of the windows (door windows) between the glass and the aluminum

they were not easy to find but I dont need them any more

Price is $120 plus shipping

Part # 116 725 00 65

sorry about the pic being upside down
 

Attachments

· Registered
1966 200 1979 300TD 1991 560SEC Metris (1991 300TE-24, 1983 300SD, 2000 C280 in the family)
Joined
·
310 Posts
W116 Orthopedic seat inserts

Up for sale is a set of 2 orthopedic seat inserts for a W114/W115/W116/W108/W109. These are real MB bits made of the same horsehair material at the rest of the seat and covered with cloth. The cover is a little stained, but entirely functional and the horsehair is in excellent condition.

To Install you will need to remove your seat cover and cut a hole through the backrest mat to run the top of the strap up through the seat and the backrest panel.

Also included is one set of the escutcheons where the adjusting band penetrates the seat back panel, The other 2 for the other side were lost :(

$100 + Shipping from 94525









PM if interested
 

· Registered
'85 500SEL Euro (UAE spec) w/ ECE 560
Joined
·
403 Posts
Guys i have a single/spare 16x8 et11 Penta (Made in Britain) P1680 wheel that i'm trying to get rid off. Pictures here.. Penta P1680 - 2 Photos by tam4705 | Photobucket
Last one that i sold was 180.81GBP delivered via FedEx (i'm in the UK) but will let this one go for less because of the missing marking and the fact that i just want it gone. Will make a great spare or replace a bent, damaged, unbalanced etc wheel. In good condition overall and not out of round at all. PM me with an offer. Thanks!
 

· Registered
'85 500SEL Euro (UAE spec) w/ ECE 560
Joined
·
403 Posts
Guys i have a single/spare 16x8 et11 Penta (Made in Britain) P1680 wheel that i'm trying to get rid off. Pictures here.. Penta P1680 - 2 Photos by tam4705 | Photobucket
Last one that i sold was 180.81GBP delivered via FedEx (i'm in the UK) but will let this one go for less because of the missing marking and the fact that i just want it gone. Will make a great spare or replace a bent, damaged, unbalanced etc wheel. In good condition overall and not out of round at all. PM me with an offer. Thanks!
This is sold. Do have one complete set of penta wheels available. If anyone is interested, please PM. Thanks.
 

· Registered
'80 450SLC Afro RHD Ikonengold, '01 113 W638 'Liz Hurley'
Joined
·
3,254 Posts
!!! - = A U S T R A L I A = - !!!

!!! - = A U S T R A L I A = - !!!

1978 Milan Brown 280SE (K-jet)

GOOD:
4 hub caps in matching colour - good condition
full central lock (1 actuator not working rear pass-driver side)
climax control, electrics: working
5L of appropriate engine oil
suspension as solid as brand new (come and inspect)
tail proud and not sagging (SLS type)
4x almost new tyres (still have moustaches all round)
NO RUST AT ALL (only minor superficial corrosion)
engine runs well (a minor vac leak is present, 90% sealed)
0-100kmh in ~12sec's
shifts like it should
bumpers quite good
oversize battery
Becker radio (pinstripes or later model... your choice)
lights near perfect
breaks as it should (and I mean it)
the "why?" (Y) exhaust manifold piece welded along the hairline crack and ceramic coated
short of steering coupler for roadworthiness (my pride and pain over last 12 months)
power washed all over few months ago
comes with additional recovered parts: L/+R tail lights, L+R headlights, steering wheel and few others


BAD:
Highly addictive handling and ride quality will make you fall in love
needs paint
needs front/rear windshield rubber
boot lid needs adjusting and fixing (bent front corners)
chrome needs a buff
driver seat needs one new spring
window winders need couplers (some slack when changing winding direction)
comes with original expired black license plates (can it be reused?)
no rego and no rwc
CAN be driven on Unregistered Vehicle Permit as is.

COME AND INSPECT (Melbourne SE)
The car is mostly for Merc enthusiasts with lots of elbow grease but in return it can provide an excellent starting point (no rust repair at all!!) for excellent restoration.
Shy of undercarriage steam clean and steering coupler for road worthy, could be a daily driver for some not weary of her temporary outside appearance.

Please PM for inspection time and date.
More pics in few days after she gets a bath
 

Attachments

· Registered
83 300D Grey, 83 300D yellow, 83 300TD white, 83 300TD maroon, 81 300SD dead
Joined
·
4 Posts
79 Bosch Euro headlights

Anyone interested in a set of Bosch euro headlights with vac pods. Look to be in good condition. Saw them in the u-pull and will go to take pictures if there is interest. They won't fit any of my cars so I didn't bother with them.

MG
 

· BenzWorld W126 Host
NOW: '90 560SEL WALD & SEC front Conversion. EOL:83/500SEC 5,6l 86/300SE 86/420SE 87/420SEL 87/260SE
Joined
·
799 Posts
WTB: front hydraulic shocks for '79 W116 450 SEL 6.9l

Hey'a!

I'm in need of front hydraulic shocks for '79 W116 450 SEL 6.9l

obviously the '77 didn't fit... And Now there's a problem getting the correct ones.

Anyone with any suggestions please?

It would be greatly appreciated!
 
1 - 20 of 172 Posts
Top