Mercedes-Benz Forum banner
1 - 8 of 8 Posts

· Registered
'82 240D, '79 450SL
Joined
·
9 Posts
Discussion Starter · #1 ·
Hi,
I am looking on finding front end alignment specs for a 1979 450SL! The DB Maintenance CD references to section 40-320 in the service manual. However is this section not included on the CD. Anyone has the missing part of the Manual?

Thanks, Dirk
 

· Always Remembered RIP
1973 450 SLC AMG, 1995 Chevy Tahoe
Joined
·
3,385 Posts
Mavis does a 4 wheel ali. for $79.00 bucks
 

· Registered
1959 220S cabriolet, 1983 240D original owner, 1999 E300 turbo diesel, 1988 560SL, 2003 SLK320
Joined
·
3,533 Posts
Any shop that doesn't use the spreader bar and the tool to lock the steering box likely isn't going to give you a proper allignment. Might be close enough if that's all you want.

Len
 

· Registered
Joined
·
53 Posts
I am also looking for the alignment specs but for a 1983 380SL

anybody have the info ?
 

· Always Remembered RIP
1973 450 SLC AMG, 1995 Chevy Tahoe
Joined
·
3,385 Posts
107 wheel alignment specs

107
front wheel camber 0deg +10'/-20'
toe-in (rolled) 2+- 1mm or 0deg 20' +- 10'1)
track difference angle at 20deg lock of inner wheel -0deg 15' +- 40'2)

meas. in straight ahead position3) 3deg 40' +- 20'
caster __________________________________________
meas.over lock 3deg 15' +- 20'


per. diff of control arm between left and right 5mm




perm deviation in hieght of pivot point
position between pitman arm and steer leve 4 mm



pivot point position = diff in hieght "a" between axis of bearing bolt for lower control arm and bottom edge of pitman arm and inter. steering level or ball pin


10.5 + 4mm _2mm
______________________________
(8.5 to 14.5mm)







and i'm never typing that again and i have no idea what any of it ment. :D
 

· Premium Member
1986 560SL with M120 V12 Engine, 1988 560SL Stock
Joined
·
14,947 Posts
Hi,
I am looking on finding front end alignment specs for a 1979 450SL! The DB Maintenance CD references to section 40-320 in the service manual. However is this section not included on the CD. Anyone has the missing part of the Manual?

Thanks, Dirk
Yes I had the same problem. The reason the CD is missing that section is because the chassis manual is also missing that section. I got my alignment specs online from a place I searched for using Google. Had to pay ~ $7 to get them. Unfortunately Ive since lost them.
 

· Always Remembered RIP
1973 450 SLC AMG, 1995 Chevy Tahoe
Joined
·
3,385 Posts
i got what i posted from

MB

Technical Data
Passenger Cars

Service Book
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top