Check the condition of the transmission fluid. It should be red. If it's brown or black and/or smells burnt, it's a sign that the maintenance schedule of the transmission has not been followed.
Transmission trouble
Hi Everyone
I have a 2000 CL600 with 265 000Kms. The car is as new, and very well maintained.
Recently, I have run into problems with the transmission. The car will not shift out of second gear into third. I can feel it shift from first to second.
I have scanned it and have the following printout:
110 - The speed comparison of Y3/6n2 to Y3/6n3 is sporadically implausable. (Resistance too low)
116 - Component Y3/6s1 (Starter lockout contact) or component Y3/6b1 (Transmission oil temperature sensor) is sporadically faulty or both. (Resistance too low)
146 - The transmission has sporadically an impermissable transmission ratio. (Resistance too high)
147 - The gear is sporadically implausable or the transmission slips sporadically. (Resistance too high)
151 - the gear comparison is sporadically negative or the target gear has sporadically not been achived. (Resistance too high)
I have access to a workshop, so I would like to tackle this on on my own, and provide pics of the procedure. Any asistance with this matter is most welcome.
:thumbsup:
I have a 2000 CL600 with 265 000Kms. The car is as new, and very well maintained.
Recently, I have run into problems with the transmission. The car will not shift out of second gear into third. I can feel it shift from first to second.
I have scanned it and have the following printout:
110 - The speed comparison of Y3/6n2 to Y3/6n3 is sporadically implausable. (Resistance too low)
116 - Component Y3/6s1 (Starter lockout contact) or component Y3/6b1 (Transmission oil temperature sensor) is sporadically faulty or both. (Resistance too low)
146 - The transmission has sporadically an impermissable transmission ratio. (Resistance too high)
147 - The gear is sporadically implausable or the transmission slips sporadically. (Resistance too high)
151 - the gear comparison is sporadically negative or the target gear has sporadically not been achived. (Resistance too high)
I have access to a workshop, so I would like to tackle this on on my own, and provide pics of the procedure. Any asistance with this matter is most welcome.
:thumbsup:
1 - 1 of 18 Posts
1 - 1 of 18 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Mercedes-Benz Forum
BenzWorld.org forum is one of the largest Mercedes-Benz owner websites offering the most comprehensive collection of Mercedes-Benz information anywhere in the world. The site includes MB Forums, News, Galleries, Publications, Classifieds, Events and much more!
Full Forum Listing
Recommended Communities
