Going by the 18x9 AMG wheels on the Tirerack, the correct size tire for such wheel on the ML is 285/50-18, but I was wondering if 285/60-18 (or any other sizes) would work as well because it gives me a few more options on tires.
Tire size for 18x9 Carlsson 1/6 Evo wheels for ML430
Join the discussion
Recommended Reading
-
'13 ML350 4Matic can I rotate my own tires at home?
Tire, Wheel, Brake and Suspension ForumHello all I've never owned such a fancy car. Can I use a floor Jack and stands and rotate my tires at home? I was wondering if I somehow need to tell the computer that the wheels are now on a different spot. Someone mentioned a diagnostic tool was needed to be plugged in to the On Board...- 0
- 69
-
Sfhenry · updated
-
Check Your Toe-in at Home to See if You Need an Alignment
Tire, Wheel, Brake and Suspension ForumIn my 2012 S65 I hit a big pothole and blew out my left front sidewall (sounded like an explosion from inside the car). I replaced the tire, and a couple thousand miles later I noticed significant wear on the inside edges of both front tires. I took it in to the dealer for an alignment and the...- 0
- 149
-
Front brake pads wear and tear question
Tire, Wheel, Brake and Suspension ForumI bought an A-class automatic 10 months ago. Since then I have driven 22K km of which I’d say 85% of this was straight motorway and minimal breaking. I’ve just brought my car in for a service to the garage I bought it from and they told me that after 10 months, my brakes are worn to 90% with...- 0
- 101
-
Sk87ieei · updated
-
Merc E350 suspension malfunction message
Tire, Wheel, Brake and Suspension ForumHi all, After replacing rear airbag suspension for my E350 Wagon 2007, I'm still seeing a malfunction message on the cluster with the arrow under the car. My mechanic assures me that all is in order. Does anyone know how i can delete this message?- 0
- 73
-
SLS Conversion 560SEC help/questions W126
Tire, Wheel, Brake and Suspension ForumFellas: I am in the process of converting my 1991 560SEC to the NON self leveling susupension. Besides the rear shocks and springs from a NON SLS car, what all needs to be done? Can the Hydraulic setup be plugged? Do I have to repace the front shocks and springs as well? The car is currently...- 2
- 1K
-
4benzes · updated
Join now to ask and comment!