Joined
·
0 Posts
I've 2001 clk 430 staggered wheel 17'x7.5 front and 17'x8.5 rear, I'm thinking about putting 235/45ZR17 tire for front and 255/40ZR17 for rear. Is my tire combination too wide for the wheel? any idea? thx
Tire Question
Join the discussion
Recommended Reading
-
'13 ML350 4Matic can I rotate my own tires at home?
Tire, Wheel, Brake and Suspension ForumHello all I've never owned such a fancy car. Can I use a floor Jack and stands and rotate my tires at home? I was wondering if I somehow need to tell the computer that the wheels are now on a different spot. Someone mentioned a diagnostic tool was needed to be plugged in to the On Board...- 0
- 38
-
Sfhenry · updated
-
Check Your Toe-in at Home to See if You Need an Alignment
Tire, Wheel, Brake and Suspension ForumIn my 2012 S65 I hit a big pothole and blew out my left front sidewall (sounded like an explosion from inside the car). I replaced the tire, and a couple thousand miles later I noticed significant wear on the inside edges of both front tires. I took it in to the dealer for an alignment and the...- 0
- 148
-
Front brake pads wear and tear question
Tire, Wheel, Brake and Suspension ForumI bought an A-class automatic 10 months ago. Since then I have driven 22K km of which I’d say 85% of this was straight motorway and minimal breaking. I’ve just brought my car in for a service to the garage I bought it from and they told me that after 10 months, my brakes are worn to 90% with...- 0
- 101
-
Sk87ieei · updated
-
Merc E350 suspension malfunction message
Tire, Wheel, Brake and Suspension ForumHi all, After replacing rear airbag suspension for my E350 Wagon 2007, I'm still seeing a malfunction message on the cluster with the arrow under the car. My mechanic assures me that all is in order. Does anyone know how i can delete this message?- 0
- 72
-
SLS Conversion 560SEC help/questions W126
Tire, Wheel, Brake and Suspension ForumFellas: I am in the process of converting my 1991 560SEC to the NON self leveling susupension. Besides the rear shocks and springs from a NON SLS car, what all needs to be done? Can the Hydraulic setup be plugged? Do I have to repace the front shocks and springs as well? The car is currently...- 2
- 1K
-
4benzes · updated
Join now to ask and comment!