Mercedes-Benz Forum banner

Suspension question

2053 Views 15 Replies 6 Participants Last post by  SL BRABUS
I am getting all new shocks and strut mounts as well as H&R lowering springs for front and rear. I know I am not providing enough information because I'm not sure how to measure or find it but will it work with 19 inch wheels. The rear are wider any advice is appreciated


Sent from AutoGuide.com Free App
1 - 3 of 16 Posts
Is the car fitted with those wheels and tires now ? If not, I wouldn't lower it till I figured out if they clear as it sits. Nothing more hoopdie (except fart cans and wings) than a 129 with cut tires and beat up wheel wells because of lowered suspension.:confused:
Not to be an ass, but considering that, what part of lowering springs makes any sense?

Sent from AutoGuide.com Free App
What do you mean?


Sent from AutoGuide.com Free App
My point was, if you are having any clearance issues, blowing money and time lowering it fruther is only going to make things worse unless you reconfigure either tires, wheels, or wheel wells. Is it worth it? :confused:
Another thing to remember is hanging the bumper on curbs. They are fragile and expensive. I wouldn't lower my 600 at all from its already low stance. Just sayin.
1 - 3 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top