Mercedes-Benz Forum banner

Service information: Air drier leaks

1108 Views 4 Replies 4 Participants Last post by  tkv000
I was perusing the mog manuals for information on how to service the firewall brake valve, as mine leaks out the bottom tube, I ran across this, thought it would be good info to share

Due to a machining fault at the supplier's, the air dryers may start to leak at the housing. The causes for this have now been identified and appropriate counter-measures have been introduced to remedy the fault.

The check should be made the next time the vehicle comes into the workshop or during the next maintenance service.

As of VIN 437.125 1W 197 136 these air dryers no longer leak. Stocks in the GLC and in the regional warehouses have been cleared of old parts.
This is old info (claims ended in 2002) but there may be some on the road still with the issue, something to check.

I've included the entire article for those interested.


See less See more
1 - 1 of 5 Posts
some people on UNIMURR had success with spraying WD40 thru the vent port into the brake valve while somebody else floored the brake pedal (with empty air tank I'd assume).
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.