Mercedes-Benz Forum banner

Running a M103 out of the car....

2225 Views 10 Replies 5 Participants Last post by  Zeitgeist
I am building the complete drivetrain of a 2001 300e into a streetrod. :surrender: Don't shoot
To start off, I bought a rusted but running car, so have all the relevant bits to make it run.

Then we built it into the body, but from the start knew that the injection would not fit in the engine bay, so we will have to make an intake manifold and run it off Weber sidies. That is not the problem......yet.;)

What I do need help with is figuring out what is the minimum bits required to make the old girl fire.........i.e the least amount of electronics to be bolted back on / connected to get spark....nothing on the injection side needs to work.. and using as much of what I have???
1 - 1 of 11 Posts

A picture is worth a 1,000 words. Lets see some pics!!! lol:)
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.