[Benz Prodigy]

Does anyone have the part number for the rubber hose that sits under the intake manifold and connects the two runners that span all the injector holders?

I also need the part number of the hose that comes off this ^ hose and connects directly to the cold start injector block.

Any help would be appreciated; the dealer's EPC represents diagrams that look less and less like my car every day...

Thanks in advance

-Ryan

 

[Benz Prodigy]

Thanks for the information.

I looked through the diagram posted, and it essentially defines what the dealership has on thier computer; there's these two odd-looking Y-pipe things that have nothing to do with my car, and no cross-pipe or cold-start feed pipe. Thanks though; this is truly a PITA.

 

[Benz Prodigy]

THANK YOU!

I'm not too concerned about the connectors; worst case scenario, short lengths of whatever sized metal pipe can be squeezed into them for the time being.

I'm hoping to eventually do away with every rubber hose related to this system, but until that happens, this will work.

Thank you for all replies.

 

[Benz Prodigy]

All is well, I got it all together, and I found the hose on an after-market website.

I went so far as to put hose clamps over all the connections, even the ones to the nylon barb fittings.

Let's see THIS leak.