JoeR,JoeR - 1/22/2005 11:44 AM
The reverse switch is common with the neutral start. It is located on the side of the transmission where the linkage attaches, behind the arm. There are 4 contacts, 2 for N & P contact and 2 for R.
First, make sure that the adjustment is correct and the bushings at both ends of the rod are good.
You can test the switch with a meter. Sorry, I don't have the info handy about which pins are the corrrect ones.
Thanks for your info.
I am assuming that I have to go under the car and find the transmission box. How do I make sure that adjustment is correct?
Any expertise is much appreciated.