The reverse switch is common with the neutral start. It is located on the side of the transmission where the linkage attaches, behind the arm. There are 4 contacts, 2 for N & P contact and 2 for R.
First, make sure that the adjustment is correct and the bushings at both ends of the rod are good.
You can test the switch with a meter. Sorry, I don't have the info handy about which pins are the corrrect ones.
First, make sure that the adjustment is correct and the bushings at both ends of the rod are good.
You can test the switch with a meter. Sorry, I don't have the info handy about which pins are the corrrect ones.
