Mercedes-Benz Forum banner

1 - 4 of 4 Posts

·
Registered
1994 Mercedes E320 wagons (2)
Joined
·
290 Posts
Discussion Starter #1
On my 1994 Mercedes E320 w124 wagon, Part #124-610-23-25, in 61/15 (Substructure, Front Floor) of EPC. Other names meaning the same thing or part also refers to Reinforcement. I am missing a piece or part that goes on the Reinforcement bolted on all fours holes. See the pictures. Anyone out there knows what I am talking about? Is that piece or part of the chassis welded on and cannot be replace?
 

Attachments

·
Registered
1994 Mercedes E320 wagons (2)
Joined
·
290 Posts
Discussion Starter #2
This reinforcement hooks up with the bottom hook of the exhaust near the 02 sensor.
 

·
Registered
1995 e320ce. 1993 230 TE. 1987 Kit car with 260e running gear.
Joined
·
632 Posts
That part bolts onto captive nuts on the underside of the tunnel, below the propshaft and also has a fixing for the ally heat shield.
If your tunnel has been destroyed you will need to weld on brackets for this
 
1 - 4 of 4 Posts
Top