Mercedes-Benz Forum banner

1 - 2 of 2 Posts

·
Registered
1990 Arctic White 560 SEC and 1990 Smoke Silver Metallic 560 SEC (formerly Cascade's)
Joined
·
182 Posts
Discussion Starter #1
How do you remove the rear window switches without breaking them? I was following Mr. Tummala's instructions for the extender arm repair, and now it is working, thankfully, but I have no working window
:(

I cannot find the replacement part online (I can only find the window switch that goes in the console, no wires attached or anything.) If anyone could give me a link, I would be most thankful.
 

·
Registered
Two '87 570SECs, one '87 560SEL
Joined
·
4,448 Posts
The switches have to be pried out of the arm. If you press the switch, the side of the switch that is raised has a notch showing. GENTLY pry this side a little, then press the switch the other way and pry a little more. It will come out. Once it starts coming out, I use a thin piece of metal (dull exacto knife blade) to pry on the top and bottom edges of the switch.

The windows should still work via the console switches.

The rear window switches in the grip arms are part number 126-820-65-10 (left) and 126-820-66-10 (right)
 
1 - 2 of 2 Posts
Top