Mercedes-Benz Forum banner

Rear forward thrust arm

432 Views 7 Replies 2 Participants Last post by  Grb3963
Starting to rebuild complete rear suspension on 2011 e350 base without air suspension..Question is the lower forward thrust arm comes with one bushing installed...Can someone give me the part number of the bushing the fork end bolts up to...Pretty sure these are the bushings I need..Can anyone confirm this
Automotive tire Font Gas Cylinder Tire

Font Parallel Screenshot Output device Number
See less See more
1 - 3 of 8 Posts
I know that you probably don't want to hear this, but pressing bushings in those control arms is more work than just replacing the components. I do not recommend replacing the bushings even if you have the magic tools and the magic touch.
  • Like
Reactions: 1
I am recommending that you replace the entire control arm assy which INCLUDES the bushing already fitted.
I understand. Call the dealer and see if that bushing is a separate part number, then use the part number to cross reference the aftermarket.
1 - 3 of 8 Posts