Could also be a bad throttle body. From the symptoms, it went into limp mode. The only way to know for sure is to do a scan and pull codes with either Star diagnostics, or a blink code reader.
Jon
Jon
Press gas, no reaction, HELP!
Hello!
So I just waxed my 300SE (1991, M104.990 722.368 trans) and wanted to go for a cruise and guess what - pressed the gas and nothing happens. Car is just rolling in DRIVE and no response from throttle pedal. Got back home imidetly. Put it N, the same. If you pressed the pedal really hard it went slowly up to 1.5K RPM. Switched the car off, restarted, revs up like it should.
What could be the fault, where I should look now?
P.S. after buying car, took it to mechanic. He said wiring has been done and engine and all the components are good...
So I just waxed my 300SE (1991, M104.990 722.368 trans) and wanted to go for a cruise and guess what - pressed the gas and nothing happens. Car is just rolling in DRIVE and no response from throttle pedal. Got back home imidetly. Put it N, the same. If you pressed the pedal really hard it went slowly up to 1.5K RPM. Switched the car off, restarted, revs up like it should.
What could be the fault, where I should look now?
P.S. after buying car, took it to mechanic. He said wiring has been done and engine and all the components are good...
1 - 1 of 4 Posts
1 - 1 of 4 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Mercedes-Benz Forum
BenzWorld.org forum is one of the largest Mercedes-Benz owner websites offering the most comprehensive collection of Mercedes-Benz information anywhere in the world. The site includes MB Forums, News, Galleries, Publications, Classifieds, Events and much more!
Full Forum Listing
Recommended Communities
