[Baig]

Willing on putting a set of 16" lenso bsx wheels on the old lady. Wheel details are as follows: 16X7.5" PCD 5X114.3.

Now I do know are 123(s) have a 5X112 PCD - am writing in to get help on how to fit the lenso's on? What could be ways of going around this except for sticking with correct PCD wheels currently on the car at the moment?

A few people that I know use the same rim with only 4 nuts bolted in on the hub as opposed to 5 - would that be a good idea should nothing else work out?

 

[bricktron]

i believe that your options are redrilling the wheel or using a product called a "wobble bolt".

 

[Baig]

Thank you for your response.
What would the pros and cons be on using 'wobble' bolts.
Any damage to the suspension?

Is there a way to permanently change the pcd on our wheels?
If so could someone please walk me through it?

 

[mike-81-240d]

Something along the lines of this should do it for you. Just make sure to triple check the size that you need and whatnot.

Home Page Search SiteSearch Wobble ES#2142850 Wobble Bolt 12x1.5x30 - Priced Each - B48LE-30

 

[Baig]

@mike - the wobble nuts would be the way to go then.

any experience of someone using them? have been reading through the forum, and it seems we have a split decision on using them on our rides. any damage to the suspension if used? safety is also a factor i hope no compromises would be made there should these nuts be used?

would be grateful should someone using them, share their insight.