Mercedes-Benz Forum banner
1 - 1 of 1 Posts

· Registered
1989 300SE
370 Posts
Discussion Starter · #1 · (Edited)
I tested my OVP relay in diode mode and it shows 0.549v. Is this in spec? I think I read 0.4-1.5v. Which end of the value will show the relay "on the way out"? If it works that way.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.