Mercedes-Benz Forum banner
1 - 4 of 4 Posts

· Registered
1985 Mercedes 380SE Metallic Navy Blue
Joined
·
489 Posts
Discussion Starter · #1 · (Edited)
I was checking my mono valve due to ac issue and found that the solenoid and its connector was burned out. The mono valve (rubber) was OK.

Where can I obtain just the solenoid for this? 85 380SE

Thanks for help.

RT


 

· Registered
1985 Mercedes 380SE Metallic Navy Blue
Joined
·
489 Posts
Discussion Starter · #3 ·
Your local wrecking yard. And if thats damaged, so could the push button control head.
Thanks. The connector at the solenoid is fried so you may be right about the control head.
 

· Registered
1972 280 SEL 4.5 (sold) 1971 280 114 Coupe (sold) 1988 300 SE 2005 jag XK8
Joined
·
2,224 Posts
If the aux. water pump is seized, it will damage the control head and possibly then the wiring to the mono valve. Alot of people add an in line fuse to the aux. water pump so if it does seize the circuit will go open to save the control head.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top