Mercedes-Benz Forum banner

Mounting a console box

781 Views 3 Replies 3 Participants Last post by  RBYCC
I'm sure this has been covered before but the answer seems to be hiding somewhere in the archives. Anyway, Im finally getting around to mounting a console box from a later model 124 into my '87 and before I start drilling the two screw holes into the console, does anyone know if there are any wires or likewise damagable items likely to be hidden under the console? The car is factory stock except for an aftermarket cell phone and that cabling was run along the door sills.
1 - 1 of 4 Posts
I'm sure this has been covered before but the answer seems to be hiding somewhere in the archives. Anyway, Im finally getting around to mounting a console box from a later model 124 into my '87 and before I start drilling the two screw holes into the console, does anyone know if there are any wires or likewise damagable items likely to be hidden under the console? The car is factory stock except for an aftermarket cell phone and that cabling was run along the door sills.
If you don't want to drill, then run two parallel strips of VHB tape on the bottom...
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top