Mercedes-Benz Forum banner

More M117 history

3980 Views 7 Replies 5 Participants Last post by  roncallo
The Isdera Imperator 108i was a low-volume German supercar produced from 1984 to 1993. The Imperator 108i was born out of the Mercedes-Benz CW311 concept car from 1978. Eberhard Schulz, who formerly worked as a design engineer for Mercedes-Benz, headed an engineering company that designed the CW311 concept. With no interest in putting the CW311 into production itself, Mercedes-Benz allowed Schulz for produce the vehicle under his own brand, Isdera.[1]

Implementing a fiberglass body upon a tubular steel spaceframe, the Isdera Imperator 108i was comparable to the Lamborghinis of its day. The original Imperator 108i featured 5.0 L (5,000 cc) Mercedes-Benz M117 V8 engine which gave the vehicle a top speed of 176 mph (283 km/h) and an acceleration of 0-60 mi (97 km) in 5.0 seconds. As Mercedes-Benz developed more powerful V8 engines, they were used in the Imperator 108i. Later engines included a 5.6 L (5,600 cc) Mercedes-Benz M117 V8, a 5.6 L (5,600 cc) AMG V8 and a 6.0 L (6,000 cc) AMG V8, with both AMG engines featuring advanced 32-valve cylinder heads.[1]

Unusually, the Imperator 108i featured a rear-view periscope, creating a bulge on the roof. It also featured gullwing doors.[1]

Production ended in 1993 with a total of thirty examples produced, two of which were exported to Japan.[2]


See less See more
1 - 1 of 8 Posts
It had an M117 with a 5 speed stick.

Any one who wants a 5 speed in there 107 should be able to just call the Isdera factory and tell them you need a clutch assembly, bell housing and fly wheel for a 1986 model.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.