Mercedes-Benz Forum banner

1 - 7 of 7 Posts

·
Registered
'84 500 SEC Euro 040 black Lorinser 2005 sl500
Joined
·
2,516 Posts
Oh so close, Roland! Thanks for keeping an eye out. Both Mapearso and myself had been looking for parts of the sets in the pictures below.

Mapearso was looking for a single "ring" that the BBS nut slips through ( BBS part # 09 24 116) and I had been looking for a set of 4 center Lorinser badges that go in the nut.

Both of us have found replacements that we needed, but I am looking for a good back up set of all 3 parts to form the screw on center for 17 inch wheels.

For reference in case you come across any in the future, the numbers for the three part centers are:

09 24 013 (half height "nut")
09 24 116 (outer "rings")
09 24 119 (Lorinser emblem cap)

I can find the half height nut, but near impossible to find the emblem cap as well as the ring.

Thanks again for keeping an eye out for them.

I just so happen to be stripping the clear coat off the wheel lips and the nuts today so your post could not have come at a better time since I have them all apart.
 

Attachments

·
Registered
1988 560SEC Euro Clone Lorinser Clone
Joined
·
1,572 Posts
roland -- thanks for the tip. if you see another set please let me know. it took me forever to find the one cap i was missing

greg -- nice score. good luck with the purchase.

best,

mark
 
1 - 7 of 7 Posts
Top