Mercedes-Benz Forum banner

Locking Mechanism Assist Vacuum Pump

6060 Views 8 Replies 6 Participants Last post by  kellyjt07
Thanks to Peter Guenther, I was able to determine that my problem with the Locking System was the Vacuum Pump located under the rear seat, THANKS, PETE!!![:)] Now, the part # is 140 800 32 48 (02). I do not know what the 02 means but I am including it anyway. The question is, does anyone know how much this part costs? Are there refurbished parts like this one available? One final question, if it was you in my case, would you replace it with a refurbished unit or brand new??

Please help!!![:(]
1 - 9 of 9 Posts

· Registered
BMW E36, MB W140
Joined
·
179 Posts
look on ebay

there some guy on ebay who has been selling many of these door-lock pumps, brand-new, made by bosch, supposedly for less than half the price of new...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33610&item=2436415798

cheers
 

· Registered
1999 S500 1993 300e 2.8 1991 190e Sportline 2.6 5sp
Joined
·
142 Posts
Discussion Starter · #4 ·
Rainmaker:

I looked at the site (THANKS!!), but the part number is wrong. There's quit...


Rainmaker:

I looked at the site (THANKS!!), but the part number is wrong. There's quite a difference between the two. The one I am looking for is # 140 800 32 48. Do you know any autowreckers who handle fairly new 140's? Do you know of any place where these can be rebuilt?
[:(]

Ernie.-
 

· Registered
92 400SE, 93 400E, 01 CLK320, 01 ML320, 98 Land Rover Discovery
Joined
·
201 Posts
Joey6,

I replaced my PSE/Central Locking pump last month on my S Class w140. It is my ...


Joey6,

I replaced my PSE/Central Locking pump last month on my S Class w140. It is my understanding, Mercedes no longer makes model specific PSE pumps on certain MB cars. MB has moved to a "universal" pump and you are required to "retro" fit the new pump using hose adapters and hose plugs. It's really not a complicated job.

http://www.mbnz.org/forums/messages.asp?messno=49844&id=10&view=t

Please review my post below for further information.

Good Luck.

Russell
 

· Registered
1993 R129 SL500 and a 1998 W140 S420
Joined
·
2 Posts
;605857 said:
Joey6,

I replaced my PSE/Central Locking pump last month on my S Class w140. It is my understanding, Mercedes no longer makes model specific PSE pumps on certain MB cars. MB has moved to a "universal" pump and you are required to "retro" fit the new pump using hose adapters and hose plugs. It's really not a complicated job.

http://www.mbnz.org/forums/messages.asp?messno=49844&id=10&view=t

Please review my post below for further information.

Good Luck.

Russell
Russell

I am looking for a central locking pump for my W140 1998 S420 part no 140 800 32 48. I tried unsuccessfully to access your post. Can you help please?
Thanks
John
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top