Indra Evo II kit from Indonesia

2137 Views 15 Replies 5 Participants Last post by milosz87, Apr 4, 2007

AMGViper

Discussion Starter · Apr 4, 2007

Also posted ths on the rev forum, but wanted more feedback before the purchase

Has anyone else heard of bad things about an Evo II kit coming from a guy named Indra Paulus from Indonesia? I was talking with another forum member last night about it and he recommended that I should go with a different kit because of fitment problems. It can't possibly worse than a Raceonusa kit where there have been problems with the kit bending in the wind, 2 inch overlaps and poor customer service. Comments?

Save

1 - 5 of 16 Posts

Kynyption

· #3 · Apr 4, 2007

Most kits will bend in the wind. Especially reproductions. The best fix for that is with some Conduit.

I know Thorsten in Germany makes some quality reproduction kits, but his kits are made to attach onto cars that are already 16vlv kitted.

Save

Kynyption

· #5 · Apr 4, 2007

Show me a hotter car than a kitted Klasse 1 rolling down the street. with some 18x12" wheels.

Save

Kynyption

· #7 · Apr 4, 2007

I know what he is talking about. You just need to make sure who ever molds the EVOII kit on the car does it right. I have seen many cars go wrong because of shops that can not mold correctly, or dont know how the evoII should look.

Thorsten sells the kit for 2k euro.

Save

Kynyption

· #11 · Apr 4, 2007

Or take that diesel out.....Put a monster M104 or M117 in.

As for thorsten give me a day or so to round up his contact info.

Save

Kynyption

· #13 · Apr 4, 2007

Something wrong with the V12's off our SL600's?

Save

1 - 5 of 16 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month