Mercedes-Benz Forum banner

1 - 4 of 4 Posts

·
Registered
CLK430
Joined
·
38 Posts
Discussion Starter #1
I know this is a long shot, but im having a serious problem finding a an automotive shop that 1st:knows what is meant by rolling the fender and 2nd: that will mount 19in rims on a CLK. Does anyone know of a shop in Connecticut? Thanks in advance for any help you can provide.
 

·
Registered
CLK430
Joined
·
38 Posts
Discussion Starter #2
thank you

So even though I dropped it with the h&r/bilstein setup, i shouldnt run into any problems with putting the Carlsson 2/5 19x8 front, 19x10 rear that ive purchased?
 

·
Registered
-06' CLS500 Lorinser-08'-MC Design Whips Project SL -06' Land Rover-
Joined
·
419 Posts
Rubbing

I would put the wheels on first and see how the car rides. My HRE's have a much deeper offset than than the 2/5's will. You may not experience the same issues as myself. If you do, then I would worry about the rolling part. What tires are you considering 265/30/19 or 275/30/19 ? The smaller might work better for you.

Mark
 

·
Registered
CLK430
Joined
·
38 Posts
Discussion Starter #4
Thanks

it was suggested that i go with the 265/30/19 and i figured im pushing it with the size rims i bought i should go with the smaller tire. But thanx for the feedback im really a novice when it comes to mods, excluding electrical (stereo) work.
 
1 - 4 of 4 Posts
Top