Mercedes-Benz Forum banner
Status
Not open for further replies.
1 - 20 of 20 Posts

· Registered
Joined
·
416 Posts
Discussion Starter · #1 · (Edited)
Selling my Factory W210 HID Headlight Housings. I put in a set of Depos and don't need these anymore. Not dull or pitted. Comes will all four hole covers and self-leveling motor system.

Asking $175 shipped, Paypal of course. You could pick them up too for $150. These are boxed up and ready to go, if you have any questions don't hesitate to ask.

Thanks,
-Frank

PS: There is currently a new H7 wiring harness in the lights, you would just have to cut off the H7 end and wire up your HID Kit (2 wires). High Bulb, turn signals and driving lights are all new and installed!
 

· Registered
06 CLS500, Boeing-737, 04 Tahoe LT, 04 Infiniti G35 Sedan
Joined
·
257 Posts
So if I dont have the HID lights will they fit? I have a 97 E420 with standard lights. What else would I need?

I might be interested if not to much of an install headache..........

Jeff
 

· Registered
06 CLS500, Boeing-737, 04 Tahoe LT, 04 Infiniti G35 Sedan
Joined
·
257 Posts
Well, looks like an install headache for me then. I'll just find some like-kind new replacements. Would like HID's but then again...............

Jeff
 

· Registered
1999 E430
Joined
·
128 Posts
I drive a W210. I was interested but have no idea what needs to be done to make this work. Or rather, how does a factory xenon end up with H7 wiring harness.
 

· Registered
Joined
·
416 Posts
Discussion Starter · #11 ·
it was the harness that came in the depo lights that i just got. I put the factory D2 wiring harness in the Depos and now the stock lights have the new H7 Depo harness. All of the other lights are the same on the harness, you just have to cut off the H7 connector and put on the D2R connector, or better yet if you get an aftermarket HID kit you just hook it up plug and play.
 
1 - 20 of 20 Posts
Status
Not open for further replies.
Top