<br> <br> OK as wor work you need to lift the car from side<br> you're going to work on and dismount the wheel<br> Then dismount plastic inner fender cover gaining<br> access to the inside of bumper.<br> The light is mounted on 3 screws but you will<br> need wrench with extension because it is not<br> convenient to access them. I did that using a<br> flat key but it took me 15 minutes instead of 5.<br> Be sure not to mess with air temp sensor wiring.<br> Unclip connector from the light and remove it to<br> the rear.<br> Lenses hold on three metal clips, just pry them<br> off with a screwdriver - pretty easy. If you have<br> 'check foglamp' on display, probably one of bulbs<br> has gone bad - and it does not necesarily means<br> that it won't lit. If you want entire lamp it is<br> cheap, here under $80.<br> <br> Reinstall in opposite order.<br> <br> <p><p>h24-76-41-118.vf.shawcable.net
