[wayneg]

A little while ago I recovered the lower speaker grills in new fabric Today I Did the upper grill which is a bit more involved so I took a few shots for future reference. After taking off the door card I used a soldering iron to melt off the plastic rivets, there are also 2 screws. All pretty straight forward. Refitting I used a hot glue gun to secure over the old rivets. I also took a shot of the bulb holder for the seat adjuster illumination incase anyone wants info. Very happy with the result. I also took time to give the whole card a steam clean which worked wonders

 

[wayneg]

The new cloth and end result

 

[wayneg]

All Done

 

[gustav20]

nice job my next task when the fabric arrives, what glue did you use?

 

[wayneg]

nice job my next task when the fabric arrives, what glue did you use?

For the upper, I used spray contact adhesive, the lower ones I did a while back, and used white Elmer's glue.. If I did them again I would just use the spray contact as it speeds things up.

 

[sully1218]

Awesome! I have the same interior color. Where'd you get the fabric? Do you have a link?

 

[wayneg]

Awesome! I have the same interior color. Where'd you get the fabric? Do you have a link?

There are loads of Chinese sellers on eBay with the same in various colours, here is a random example Ebay link