Mercedes-Benz Forum banner
1 - 1 of 4 Posts

· Registered
2008 E550 4Matic; 2011 ML550 4Matic
149 Posts
I did this half year ago, similar with yours, only difference is step 8, I found after filling 400ml, oil will drain from inspection hole, that's not enough oil in the case. So I use paper tape wrap the end of hose, pressure in another 300ml, and quickly pull out hose and screw in the nut, about 50ml drain out, as a result, totally about 650ml oil filled in the case. So far so good.

Sent from Free App
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.