Mercedes-Benz Forum banner
1 - 4 of 4 Posts

Registered
MB200 CDI 2014
Joined
6 Posts
Discussion Starter · #1 ·
Trying to find something able to make my car 20 mm higher. Can not drive out from my
garage without lower part of the car touches on the way up.
Coil spring spacer or new springs.?
If you could use Coil spring spacers, what typ is recomended to use?
My car is a MB 200 CDI
Type 245G
Var. M208 M2.
Ver. MZAAB502

Thanks for info.
 

W163 and General M Gremlin
Joined
16,864 Posts
Trying to find something able to make my car 20 mm higher. Can not drive out from my
garage without lower part of the car touches on the way up.
Coil spring spacer or new springs.?
If you could use Coil spring spacers, what typ is recomended to use?
My car is a MB 200 CDI
Type 245G
Var. M208 M2.
Ver. MZAAB502

Thanks for info.
Has your car been lowered?

Your vehicle should have optional spring pads you can purchase.
Look into the wheel wells for front and rear; at the top of the spring where it is seated, there should be a spring pad with dimples on the underside edge of it. Feel for it or count how many dimples. From there, you can determine,I would imagine, increase to a thicker pad (larger #) to raise the height. Your model will have spring pads available from #1-4.

===>>> Please update your user CP info....

click on your icon----> click on Account Settings---->
goto Account Details----> add vehicle details---->
ADD your make model YEAR ----> click save
 

W163 and General M Gremlin
Joined
16,864 Posts
Just looking at the epc for your model, it doesnt look like you have shims/pads to choose from. I could be wrong on this.
Rear:

Front:
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top