CLK350

Michael w220 said:

I just bought a w209 convertible and i replaced the fog lights with led lights.
but they will not come on and stay on when you set the switch to them.
They only flash for a few seconds like Christmas tree lights do. What could be the problem? Or can i just wire them to the headlights for them to work?

Click to expand...

They don't draw enough current you need to add a resistor in parallel or reprogram the front sam controller for lower current.

Sent from my SM-G892A using Tapatalk

Michael w220 said:

Oh ok but i dont have HID headlights i have the halo LED plug ones no resistor or paralle if them are connected to the sam ?

Click to expand...

I'm pretty sure if post or pm vin no I can double check.
Where are you located, do you know somebody with xentry or may have your own?

Sent from my SM-G892A using Tapatalk

Michael w220 said:

Ok my vin is....
WDBTK56F18F251763

Click to expand...

I can confirm your headlights are directly wired to the front sam, best way to calculate the resistor is to measure the current on the original bulb, then measure the current of the LED on the bench wih14V.
If you don't know how to calculate it post the measurements.
The so called CAN eliminaters don't always work and a resistor is cheaper.
Still best way to do this would be reprogramming the SAM instead of burning off energy.
Where in the US are you I can may point you to somebody that can do the programming.
Paul

Michael w220 said:

Im in Cleveland ohio paul do you know of anyone that can do all that and get my fog lights working properly?

Click to expand...

I did date a girl from Cleveland but I dont think that helps, check the indy shops.
If you find one and they dont now how to do it I can help.
You could get a Chinese clone sds but it will set you back $600 to $800

Sent from my SM-G892A using Tapatalk