[Perkunas]

My multiplexer has been great aside from not being able to read a couple modules. I'm thinking it's potentially the car and not the multiplexer.

I have a few spare computers around, wondering what am I supposed to replace to test?

 

[jal1224]

Which car, which multiplexer?

Jon

 

[TimeCapsule]

Does the V8 use two EZL modules?

 

[jal1224]

He should only have one that operates both coils, hence my confusion. There are pins from the two coils in the 38 pin connector; one pin for each terminal 1 on the coil, and a combined pin for terminals 15.

Jon

 

[jal1224]

If you are not sure whether it's the ezl module or the multiplexer, try doing a blink code reading. Here's the hook up and codes for the LH equipped 500:

K6JRF Auto Page

Jon

 

[Perkunas]

Chinese c3 multiplexer. Darn it, so that's the strange part that it connects to. I never pulled that one out, only have the computers under the coffin box. I'll get a blink code reader and see if I get anything out of it.

 

[Perkunas]

It was the multiplexer. I hooked up another that I have, that's constantly dying on me, and it read the ez1