Mercedes-Benz Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
36,559 Posts
Discussion Starter · #1 ·
C32 on 18',19' or even 20' wheels. Carlsson & AMG are on top of my list. But I was told that the car has a huge AMG caliper in the front, therefore, not many wheels can fit. Anyone put any 18'+ wheels for a C32?<br>
<br>
Also, is it possible to put a set of 19' or above on WITHOUT rolling the rear fender? 8.5J all around???<br>
<br>
I am thinking of lowering the car, cause the gap between the tire and the front fender is too big. What spring would you recommend? (provided not rolling the car again!)<br>
<br>
 

· Registered
Joined
·
36,559 Posts
Discussion Starter · #2 ·
With the proper offset, there shouldn't be a problem fitting wheels in there but the smallest you can go is 17 X 7.5 with +37 offset.<br> <br> Again with the proper offset, you can get 19x8.5 front and 19x9.5 rear without rolling the fender.<br> <br> Springs really depend on how you want your car to sit and ride.<br> <br> Eibachs have nice cushy ride but don't lower as much.<br> <br> H&Rs drop the car a bit more but are stiffer in comparison.<br> <br> I prefer H&Rs since it handles better and I don't mind going slow on bumps.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top