axle shaft replacement
1 - 5 of 5 Posts
certainly easier if you have a lift. the differential needs to be drained/refilled.
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
W123 250 - M123.920 cylinder head torque specs
W123 E,CE,D,CD,TD,TE ClassHi everybody, My 1979 250 (engine M123.920) blew the head gasket. I'm intended to change it, but unfortunately I don't have a Workshop or Repair Manual. Maybe somebody has the Bentley or the Haynes Service Manuals that can hand me the torque specs of the main head bolts of the cylinder head...- 4
- 115
-
Fast Turn Signals
W123 E,CE,D,CD,TD,TE ClassBoth driver and passenger turn signals are blinking fast, thought it was a bad bulb and replaced all turn signal bulbs but still blinks fast. Any ideas?- 4
- 83
-
AaBorokokok · updated
-
Cant remove water pump from housing
W123 E,CE,D,CD,TD,TE ClassMy water pump is seized and needs replacing but I cannot get it out of the housing. I have had it submerged in vinegar for the last two days to try and break down any rust and free it, but it just wont budge. Anyone have any suggestions?- 11
- 232
-
Power Steering Fluid Change
W123 E,CE,D,CD,TD,TE ClassSo I'm getting ready to do this in the next few days. I've got the filter and some plain old dextron III atf, but there's almost no info out there in the manuals or on this foum about the procedure. I read the diesel giant post on the subject: Mercedes Power Steering Fluid Service But is that...- 25
- 23K
-
misterkennedy · updated
-
W123 center console lights not working???
W123 E,CE,D,CD,TD,TE ClassHi there. I just bought a 1984 300D and noticed my dash lights were very dim. I ordered LED's to fix that problem but at the same time I noticed all the lights in the center (ie. climate control, etc.) were not working. I thought maybe it had something to do with the dimmer but I just took the...- 29
- 553
Join now to ask and comment!