Mercedes-Benz Forum banner
1 - 4 of 25 Posts

· Registered
210.065
Joined
·
2,947 Posts
check code first, I have a similar problem earlier this year, I read the sticky o AC blowing warm air in this forum. I got code 1416 and in the end got my compressor changed and everything is fine after. If your compressor is not turning, r134a will not go into the system.
 

· Registered
210.065
Joined
·
2,947 Posts
ok thanks for that. I take it u get all the codes and that from a diagnostic machine? (so i'll have to take it to a garage to get that info)
oh no, read the sticky, you can check code from your a/c display, you can get a diagnostic from your a/c display function as well. read the sticky first and you may save much :)
 

· Registered
210.065
Joined
·
2,947 Posts
unfortuantly i don't have that climate control thing (ac display) . I just have the scroll things (to select hot and cold) and knobs for u know what. But thanks for the help.

How much did the part cost for a new compressor. Is this the part which was replaced?

MERCEDES, E CLASS (W210) Air conditioning compressors, Automotive air conditioning vehicle parts, Aircon Auto
Yes, this is the one. The sticky also teaches you how to replace. Don't worry. But you need to make sure this is the part, because sometimes other problems may also cause a normal compressor to stop turning.

Will the compressor turn when you rev the engine say to 2k/min?
 

· Registered
210.065
Joined
·
2,947 Posts
Thank you Matt. I don't think it is the duovalve because it doesn't affect the compressor, no harm cleaning it anyway.

Most likely the compressor valve/the whole thing.

Condensor? I don't know.

134a, unlikely if it was charged in less than a year.
 
1 - 4 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top