I just recently purchased a 1995 S500 coupe with the AMG package but I cannot find any information on this vehicle. Help! it is a beautiful car but I would like more info on if this a Benz manufactured AMG or somebody adding decals and rims and such.Just want to know the truth.Thanks for any help.Also the automatic window closing feature on driver side only operates manually or with remote.There is a rattle in the passenger side rear area that I cannot find(driving me insane)and last but not least the passenger side front seat does not slide open automatically when seat is pulled open. Any help will suffice. Thanks again.
95 S500 COUPE AMG
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Cracked and broke car's "electric wire plastic cover" for ignition coil
General Mercedes-BenzHi folks, I'm a new member and own a C230 Kompressor (year 2000). I'm a DIY-guy and this forum has been quite helpful for learning. I decided to put this question in the general forum as it could apply to many types of Mercedes. 2 weeks ago, I was replacing my ignition coils and in the process...- 4
- 80
-
Key turn
General Mercedes-BenzLent my S280 to my sister-in-law got a phone call saying the car wont start in the high St my work was only 5 minutes away so I went over to see what was wrong, Dead no start after calling the AA got the car carried away to my local work shop. Starter motor & relay had burnt out. My question is...- 2
- 59
-
Bad VIN?
General Mercedes-BenzI just purchased a W124. The seller had it registered as a 1985, but the Wikipedia pages I read seem to indicate the 124 didn't exist until 1986. I have tried multiple online VIN decoders and they say the VIN is not valid. I have also tried to enter it into EPC but it also comes up with nothing...- 11
- 93
-
Hi i am looking for part number from Viano 3.0 2009
General Mercedes-Benzpicture attached. w693- 2
- 94
-
hicks777 · updated
-
PRE-SAFE Inoparative See Operator's Manual (first time seeing this)
General Mercedes-BenzQuestion: What does this mean... Also.. Using a Foxwell Scan Tool Codes: 5502 Level calibration in not successfully carried out 5400 Check the component F58kG (Air suspension compressor) 5045 ECM not identified or incorrect control module 2010 ML 63... Any Insight would be helpful...- 0
- 43
-
tonytamg63 · updated
Join now to ask and comment!