416 406 doka body
1 - 4 of 4 Posts
]
only the body or a 416 doka with bad motor and transmission and..., but with a decent bo...
only the body or a 416 doka with bad motor and transmission and..., but with a decent body,
only the body or a 416 doka with bad motor and transmission and..., but with a decent body,
only the body or a 416 doka with bad motor and transmission and..., but with a decent bo...
only the body or a 416 doka with bad motor and transmission and..., but with a decent body,
only the body or a 416 doka with bad motor and transmission and..., but with a decent body,
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Air pressure question
UnimogI've fixed 2 easy to find leaks in the air system but there seems to be more that are not so easy. The main one was the trailer brakes. That's good now. The other was the seat. Now with both of those eliminated the pressure leaks down to 4 bars overnight but will stay there indefinetly. I figure...- 10
- 1K
-
mogstick · updated
-
Wireless winch remote functions
UnimogHi guys. I'm after your opinions and thoughts please. I seem to have got a lot of the things I wasn't sure of sorted with my F56. My attention has now turned to controls as I don't have a remote with it. I'm thinking of setting it up with a wireless Lodar handset. Where I'm at now is that I'm...- 3
- 188
-
Yes another 1300 turbo job, needing information!
UnimogHi [email protected], Yes I took my engine to the machine shop & asked them to machine in & supply the oil cooling squriters. I do not believe they are Mercedes units. Please could someone tell me the size orifice hole size? Also, my engine has a sleeve in the block directing the oil from the cooler to the...- 12
- 1K
-
Torque for brass pressure or temperature sensors
UnimogJust tried to fit up an oil temperature sensor to the oil filter drain plug. Its M10x1mm. Its not tapered and I fitted with copper washer and thread tape. Fitted well, but I tightened to what I thought was enough to stop an oil leak but it sheared off. As its a thin hollow tube, then torque is...- 14
- 296
-
Electronic fuel injection for an s model
UnimogDoes anybody know a electronic fuel injection for m180 engine. Its built in a 404s- 1
- 95
-
Antonio mog404s · updated
Join now to ask and comment!