Mercedes-Benz Forum banner

3 liter Head and block

719 Views 3 Replies 3 Participants Last post by  Maxh
I would like to know what would i need to do a 3.0 liter conversion, from my 2.6. Could i just drill the block the same size, and use my existing parts? Do i need to do anything to my head, or would i need to replace it? Any help would help.

Thanks
1 - 4 of 4 Posts

· Registered
Mercedes-Benz
Joined
·
2,253 Posts
try to find out if you can't just put a 300E engine in your car.

greetz,

matteus...


try to find out if you can't just put a 300E engine in your car.

greetz,

matteus
 

· Registered
1990 190E 2.6
Joined
·
97 Posts
the 300e engine is the same (m103) that is in the 190e 2.6, just bigger displacement. I...

the 300e engine is the same (m103) that is in the 190e 2.6, just bigger displacement. It will fit a 190e2.6 engine bay

That's probably easier than doing the work to your own engine.
 

· Registered
Joined
·
54 Posts
Discussion Starter · #4 ·
I plan on building it myself

I know it fits, I just want an engine with hardly any miles, and pretty much new. I plan on black chroming some parts also, and machining some of my own parts. I have allot of free time.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top