Mercedes-Benz Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi guys-
I'm putting a M130 into a UniMog. It had a worn #6 exhaust cam lobe, so I got one from a wrecking yard. It appears that the bolts holding the 3 cam towers are also head bolts? What's the easiest way to do this swap? I didn't see any marks on the cam to line it up to make sure timing stays on, nor does my MB Mog manual describe it very well. Help! Thanks, Kelly
 
1 - 2 of 2 Posts
Top