Thanks Benzyle for your reply. My cover has the bottom "bar" completely gone and part of the "vertical supports" on both ends damaged. I have thought of making a form and having a fiberglass part made and attached as a replacement.
Stache
Thanks Benzyle for your reply. My cover has the bottom "bar" completely gone and part of the "vertical supports" on both ends damaged. I have thought of making a form and having a fiberglass part made and attached as a replacement.I can't answer specifically ,,but the C55 essentially has a CLK w209 front end and if a 209 part came off ,,that is what I would use..
Variants may have or not have , lamp washers and or parktronic sensors...
Bumper covers can be repaired if they are not totally smashed...I repaired two big cracks on mine ,,much cheaper than replacing it..
So, ended up cutting and splicing the fog-light wires. Looked for a bulb with the correct 11mm spread on the C55 connectors but could not find anything that gave the specifications of different bulbs. Bought a connector that fit the OSRAM bulb and spliced.Well, I got a bumper cover from Luxury Auto Dismantling from a CLK of the same color code as my car. The exchange was made easily. Only had to remove two L-brackets from the bottom of the bumper that blocked the fit. Also, the fog light connection is different. Still have to work that out. Will see if there is an adapter from the round AMG to oval OSRAM. All in all, pleased with the change.