Mercedes-Benz Forum banner

2000 cl500 only drivers window working

874 Views 10 Replies 2 Participants Last post by  H20ham
New to me car, just wanna get the windows up
Fuses etc all seem fine.
Did a quick search, nothing seems to work.
Ideas please
1 - 4 of 11 Posts
Wiring from the body into door very poor design. Broken wires are a known issue on the CL model
thank you Calgary from the North West Kootenays (Kootenay Lake) 80 miles as the crow flies to you.
as the door articulation. So power still feeding drivers door.
While I am in there, should I....__?
There are several thin wires in this harness. I had problems with my speakers, but the mirror adjustments worked ok. You might only have some wires that are broken, while others in the same harness are ok...I missed going to B.C. this summer. Construction at the Kicking Horse would have made a much longer trip...
thank you Calgary from the North West Kootenays (Kootenay Lake) 80 miles as the crow flies to you.
as the door articulation. So power still feeding drivers door.
While I am in there, should I....__?
80 Miles as the crow flies..but much further to drive....Why is there no road from Canal Flats to Kaslo ?? That would help....
No, not a new door harness. A good mechanic can cut the covering of the harness, insert a piece of wire into the broken ones. Labour intent - but a lot easier than
removing the door and replacing the harness. No idea how you would get into the body to install the other end of the harness.
1 - 4 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top