Mercedes-Benz Forum banner
1 - 2 of 2 Posts

·
Registered
'82 500sec euro, '95 Ford F150
Joined
·
1,777 Posts
The ball sockets in those rods are unfortunately the biodegradable garbage material.
When my 600 nose dived one day after loosing one of these sockets, I made my own rod. Using a couple of small heim joints, that I threaded into an appropriately sized pipe. I did have to remove the balls from both the potentiometer and the lever on the sway bar, and replace them with a couple of 6mm bolts. I still have the ability to change the ride height by shortening or lengthening the rod length, however you can also change ride height through the HHT.
 
1 - 2 of 2 Posts
Top